Our tagline is One Mill. One Standard. Every Batch. This post explains what that means on the mill floor at Amaravathipalayam, Muthur, in Kangayam taluk, where we have pressed copra since 2012, about 500 MT of copra a month.
1. Copra dried to about 6% moisture
Wet copra risks mould and high free fatty acids. We dry copra on our yard until moisture reaches about 6% before it goes to the cold press expellers.
2. Cold pressed: extracted below 49°C
Copra is cold pressed in SPF 9-bolt cold press expellers, and we extract oil at less than 49°C.
3. Filtration in multiple stages
Filtered in multiple stages to 1 micron.
4. Independent lab testing
A sample of our coconut oil was tested by Chennai Mettex Lab Private Limited (lab no. 2728858/001, test certificate dated 19.09.2026) against FSSAI standards. Free fatty acid (as lauric acid) was 0.13%, acid value was 0.25 against a limit of not more than 6.0, moisture and peroxide value were not detected, and the tests for mineral oil, cottonseed oil, argemone oil and added colouring matter were all negative. The lab remarked that the sample conforms with the prescribed standards for the tested parameters.
The full results table and the report are on our Quality page. Ask us for the CoA of the batch you are buying.
A batch of coconut oil leaves our mill in Kangayam only after it has been tested. This is not a slogan. It is the last step of the process we run under one roof: copra from the Kangayam belt, split and dried, graded, cold pressed below 49°C, filtered in multiple stages to 1 micron, lab-checked against FSSAI parameters, then dispatched.
Copra is dried to about 6% moisture before it is pressed. The oil is extracted on SPF 9-bolt cold press expellers, below 49°C. Filtration is in multiple stages, down to 1 micron. That sequence is the same for Crystal Clear Water White Coconut Oil and for AMK GOLD, which is the same water-white specification packed as the mill’s brand for large-quantity supply.
After filtration, every batch is lab-tested. We publish an independent laboratory report on the Quality page, with the laboratory name, the report number, the test certificate date, the results and the FSSAI limits the sample is checked against. Buyers who have a batch number can look up key results and download the report on the batch certificate page. A certificate of analysis for the batch is included with the dispatch documents; the independent report is also available on request.
The mill holds an FSSAI Central Licence, ISO 9001:2015, ISO 22000:2018, and Coconut Development Board RCMC No. 20214460. We are a US FDA registered food facility (registration number 1632367****). We do not describe the mill as FDA approved. We also hold IEC AYUPS4450N, and we publish GSTIN, D-U-N-S and Udyam numbers on the site and in the company profile PDF.
This checking is why we can offer the same oil load after load to food, personal-care and industrial buyers, including repackers, traders and exporters. Private-label packs of 1 L and 500 ml are filled from the same line, with artwork confirmed in the quote, so a brand’s label is backed by a tested batch.
If you need the paperwork for a shipment, ask with the grade and quantity. We share batch documents with the quote or with dispatch. Visit the Quality page for the current published report, or enter a batch number on the lookup page. For a first order, request a sample and send packing, quantity in MT and destination so we can reply with a written quote.
Sri Sellandiamman Oil Mill has done this work in Muthur, Kangayam Taluk, since 2012, pressing about 500 MT of copra a month and supplying buyers across 15 states and territories. The tagline on the mill is the standard we hold: One Mill. One Standard. Every Batch.
Buyers sometimes ask whether a certificate is only issued for export. It is not. Domestic bulk loads, private-label fills and export shipments all come from the same tested batches. Dispatch documents can include a commercial invoice, a packing list, a certificate of analysis for the batch, and, where the destination requires it, a certificate of origin and a phytosanitary or health certificate. The independent lab report is on the Quality page and is available on request with the order. If you already have oil from us, use the batch number on the tin, barrel or paperwork to look up the certificate. If you do not yet have a batch number, start with a sample and a written quote, then read the published report while the first load is being prepared. Keep the Quality page and the batch-certificate lookup bookmarked; that is how we intend every buyer, not only export customers, to check a load against the tests we already ran at the mill in Kangayam. That habit — read the report, then look up the batch — is the practical meaning of “every batch tested” on this site.
Read next: Quality, lab reports and certificates · Look up a batch certificate · Coconut oil manufacturer in Tamil Nadu